Home > News > Content

If The Laser Marking Machine's Motorized Z Axis Not Moving

- Mar 16, 2018 -

If the laser marking machine's Motorized Z axis Not Moving, Please open the left door of the supply unit and find the driver board as shown in the picture.

Please open the left door of the supply unit and find the driver board as shown in the picture.


Please check that the six screw which pointed by the pink arrow are well tightened.

We would recommend you to loosen those six screws first and make sure each chip are well inserted and then tighten them one by one.

By doing this steps, normally will solve the problem.


If the problem is not solved, please can contact us.  --- HBS Laser Tech

Related News

Related Products

  • CO2 Laser Printing Machine Used Wood Rubber Engraving Machine Laser Marking Machine
  • High Precision Fiber Laser Engraving Marking Machine With CE Certificates
  • The Automatic Focusing Fiber Optical Laser Coding Machine As Fiber Laser Marker
  • New Fiber Laser Marking Machine With Moving Wheel HBS-GQ-20C1
  • Portable Pneumatic Dot Pin Marking Machine GZB810PA
  • Electric Engraving Pen