Fiber Laser Marking Machine

Machine Model

HBS-GQ-20A1

Value Interpretation

Laser Source

Raycus Advanced+, IPG, or customized

Raycus is currently widely recognized globally as the laser brand offering the best balance of quality and price. For high-end needs such as IPG, we can also provide customization.

Average power

20watts (30/50/100W optional)

The most basic power rating is 20W, which can meet basic needs. For industrial use, 50W is more common.

Laser Power Lifetime

100,000 hours (Theoretical data)

A lifespan of 100,000 hours, or approximately 11 years, is theoretically achievable, and in practice, some customers have used it for as long as 15 years.

Fiber cable length

2.5m

2.5-meter laser fiber optic cable can meet most usage scenarios.

Cooling

Air cooling

Air cooling is the safest and simplest cooling method, and it is safer and more energy-efficient than water cooling.

Marking Wavelength

1064nm

The 1064 nanometer light source is the most commonly used light wave on the market, so the cost can be reduced while still being practical.

Beam Quality

﹤1.5

A value less than 1.5 is considered excellent, indicating very high beam quality. This allows for higher resolution and accuracy, resulting in a clear, smooth, and stable beam profile.

Laser Repetition Frequency

≤100kHz

Below 100 kHz, each pulse contains a large amount of energy, which is known as High Energy per Pulse.

Marking Depth

0-1.5mm (adjustable with power setting, speed, materials)

The printing depth is adjusted according to the energy and speed. For operations requiring specific printing depth, multiple laser prints can be performed.

Marking Speed

≤12000mm/s

Standard marking speed is typically adjustable, but the speed can be changed according to the material and power to produce different effects.

Minimum Line Width

0.01mm

A minimum character width of 0.01 mm can meet basic needs, and even meet special needs for high precision.

Minimum Character Size

0.05mm

A minimum character size of 0.05 mm can meet basic needs, and even high-precision special requirements.

Repetition Precision

±0.001mm

A repeatability of 0.001 mm is sufficient for operations requiring high precision.

Standard Marking Area(mm)

110*110

110 mm is usually the requirement for a standard printing range, while 175 mm is also frequently required.

Optional Marking Area(mm)

65*65,75*75, 110*110,150*150, 160*160, 175*175, 200*200, 300*300 or customized

The marking range can be small or large, typically 300 mm, or larger sizes can be customized.

Usually 160-300mm marking area matches 50w,110mm matches 20/30w

Typically, a 50W marking is used for a marking range of 160 to 300 mm, while a 20 or 30W marking is used for a 110 mm marking.

Focal Length

Depends on marking area requirements

Different marking ranges have different focal lengths. For example, a marking range of 110mm typically corresponds to a focal length of 160mm.

Power Consumption

≤500W

Typical standard power consumption

Machine Requirements

AC220V(±10%), 50Hz(±10%), 10A

Standard voltage

Operation Temperature

-10℃-60℃

It can adapt to a variety of temperature ranges, especially high-temperature operation. For extremely high-temperature environments, it is recommended to reduce the frequency of use and lower the ambient temperature.

Humidity

5-95%

It can adapt to a wide range of humidity levels, especially in dry environments. For environments with extremely low humidity, it is recommended to reduce the frequency of use and increase the humidity of the surrounding environment.

Control System

Win7, Win8, Win10, Win XP,

Compatible with multiple computer systems

RAM

2GB-16GB

Can be used for running on large amounts of memory

HDD

500G

Can be used for running on large amounts of memory

Marking Formats

AI., PLT., DXF., TIFF., PNG., BMP., JPG. etc.

The marking format supports multiple formats to cater to customer usage habits.

Computer Connection

2.0USB

USB universal interface

Software

Ezcad 2.9.0

EZcad, now widely recognized for its ease of use and multifunctionality, is the choice of most customers.

Lens Type

HBS-65

HBS-110

(Standard)

HBS-175

HBS-220

HBS-300

Focal Length

100mm

170mm

250mm

330mm

420mm

Marking Area

65mm*65mm

110mm*110mm

175mm*175mm

220mm*220mm

300mm*300mm

Note: If no special request, HBS will provide the standard marking area: 110mm*110mm

Other marking size can be customized.

Material

Advantages

Considerations

Acrylic

Ideal for engraving

Aesthetically pleasing

Old stock acrylic will not work as well as new acrylic

Changing acrylic brands will yield different results

Glass

Good laser etching qualities

Cheap

Micro-fracturing occurs on the surface, can cause breaking

Light marks are only possible

Leather

Good engraving qualities

Many cheap choices

Different leathers will mark differently, requires test pieces

Thin leather risks breaking if marked too deep

Metals

Stainless steel and aluminum are ideal for marking

Raw or coated metal can be used

Expensive

Some metals will darken, others will lighten

Plastic

Wide choice in plastic type

Light marks can be made with high contrast (foaming)

Expensive

Certain polymers can’t be used, and the ones that can are highly variable in how they react to lasering

Wood

Aesthetically pleasing with great results

Works with maple, cherry, birch, and some pine woods

Low ignition temperature, so burn marks are common

Can be inconsistent if workpiece is not flat/contains knots